The Micro USB 1Mtr Power and Data Cable is a 1-meter USB 2.0 cable with a standard-A connector on one end and a Micro USB connector on the other, supporting both power delivery up to 1A and full data transfer for programming and serial communication. The micro usb cable for esp32 boards, NodeMCU ESP8266, Arduino Nano, and Arduino MEGA connects these development boards directly to a PC for sketch upload and serial monitor access through the Arduino IDE or any terminal program without a separate power supply.
The esp cable uses USB 2.0 data lines — both D+ and D— are connected inside the cable, which is necessary for data transfer. Cheap power-only Micro USB cables omit the data lines entirely and appear visually identical to data cables but will not allow sketch programming or serial communication. The 1A current rating is sufficient for most development boards at idle and during programming, but boards with high peak WiFi current draw — particularly ESP32 under heavy transmission — may benefit from a powered USB hub rather than relying on a PC USB port alone.
The non-obvious quality check for any Micro USB data cable is the connector contact count — a data-capable Micro USB plug has 5 pins, while a power-only cable has 2. This cable carries all 5 contacts. Available from StemVolt, this unit is suitable for engineers working on development board programming and practical electronics projects.
Related Product:
-
Checkout the ESP Boards for build smart projects
Features:
- USB 2.0 standard supports full data transfer and board programming simultaneously
- 1 meter length gives comfortable reach from PC to dev board
- Up to 1A current supports NodeMCU ESP32 and Arduino during operation
- Micro USB connector fits most development boards without adapter needed
Technical Specifications:
Applications:
- Micro USB 1Mtr Cable used for NodeMCU ESP8266 sketch upload session
- Arduino Nano project uses micro usb cable for IDE programming and debug
- ESP32 prototype uses micro usb cable for esp32 serial monitor logging
- IoT lab uses esp cable for daily dev board power and upload
- NodeMCU WiFi build uses micro usb data cable for serial terminal
Package Includes:
- 1 × Micro USB 1Mtr Power and Data Cable
Vivek Sengar –
Authentic product received
Pulkit Upadhyay –
Stable file transfer between devices and reliable performance for programming development boards
Aneesh Kumar –
Flexible reach for desk and project setups, fits most development boards and small electronic devices perfectly
Harshit Lodha –
Happy with purchase