The 12V DC 1/2 Inch Electric Solenoid Valve controls fluid or air flow through a half-inch pipe by opening or closing an internal plunger when 12V DC is applied. In its resting state the solenoid valve stays closed, which means fluid flow only happens when power is on. This is a normally closed design, so any power failure automatically stops the flow — useful in safety-critical irrigation and water control builds.
The electric solenoid valve handles pressure from 0.02 to 0.8MPa and draws between 600mA and 1A at 12V. A non-obvious detail is that a minimum pressure of 0.02MPa is required to hold the valve seat open reliably once the coil lifts the plunger. If your system pressure drops below this threshold, the valve may not open fully even with power applied. The aluminium body keeps the total weight at just 100 grams, making it light enough for mounted panel installations.
Engineers and automation builders use the air solenoid valve alongside Arduino-controlled relay modules or MOSFET driver boards. StemVolt provide this water air valve with standard 1/2-inch threaded fittings to connect pipe systems.
Related Products:
- Explore Solenoid and Other Sensors
Features:
- Normally closed operation stops fluid flow automatically when power is disconnected
- Pressure range of 0.02 to 0.8MPa covers household water and compressed air systems
- Current rating of 600mA to 1A stays within single-channel relay module limits safely
- Aluminium keeps the valve weight at only 100 grams for easy panel mounting
Technical specifications:
| Specification | Details |
|---|---|
| Valve Type | Normally closed |
| Operating Voltage | 12V DC |
| Material | Aluminium |
| Current Rating | 600mA~1A |
| Operation Mode | Normally closed |
| Pressure | 0.02-0.8MPa |
| Weight | 100gm |
Applications:
- Automated irrigation system uses 12V DC 1/2 Inch Electric Solenoid Valve to release water on schedule
- Aquarium auto top-off controller opens valve to refill tank when float switch drops low
- Air compressor blow-off circuit uses solenoid valve to release pressure on relay trigger signal
- Hydroponics nutrient dosing system switches valve open to deliver measured water pulses per cycle
Package includes:
- 1 x 12V DC 1/2 Inch Electric Solenoid Valve














Reviews
Clear filtersThere are no reviews yet.